Manhattan Project

Manhattan Project, U.S. government research project (1942–45) that produced the first atomic bombs. See Britannica’s interactive timeline of the Manhattan Project.

Creation of the U.S. atomic weapons program

American scientists, many of them refugees from fascist regimes in Europe, took steps in 1939 to organize a project to exploit the newly recognized fission process for military purposes. The first contact with the government was made by G.B. Pegram of Columbia University, who arranged a conference between Enrico Fermi and the Navy Department in March 1939. In the summer of 1939, Albert Einstein was persuaded by his fellow scientists to use his influence to present the military potential of an uncontrolled fission chain reaction to Pres. Franklin D. Roosevelt. In February 1940, $6,000 was made available to start research under the supervision of a committee headed by L.J. Briggs, director of the National Bureau of Standards (later National Institute of Standards and Technology). On December 6, 1941, the project was put under the direction of the Office of Scientific Research and Development, headed by Vannevar Bush.

More From Britannica

nuclear weapon: Founding the Manhattan Project

After the U.S. entered World War II, the War Department was given joint responsibility for the project, because by mid-1942 it was obvious that a vast array of pilot plants, laboratories, and manufacturing facilities would have to be constructed by the U.S. Army Corps of Engineers for the assembled scientists to carry out their mission. In June 1942 the Corps of Engineers’ Manhattan District was initially assigned management of the construction work (because much of the early research had been performed at Columbia University, in Manhattan), and in September 1942 Brig. Gen. Leslie R. Groves was placed in charge of all Army activities (chiefly engineering activities) relating to the project. “Manhattan Project” became the code name for research work that would extend across the country.

Manhattan Project expansion under Groves and Oppenheimer

It was known in 1940 that German scientists were working on a similar project and that the British were also exploring the problem. In the fall of 1941 Manhattan Project chemist Harold C. Urey accompanied Pegram to England to attempt to set up a cooperative effort, and by 1943 a combined policy committee was established with Great Britain and Canada. In that year a number of British and Canadian scientists moved to the United States to join the project.

If the project were to achieve timely success, several lines of research and development had to be carried on simultaneously before it was certain whether any might succeed. The explosive materials then had to be produced and be made suitable for use in an actual weapon.

Uranium-235, the essential fissionable component of the postulated bomb, cannot be separated from its natural companion, the much more abundant uranium-238, by chemical means; the atoms of these respective isotopes must rather be separated from each other by physical means. Several physical methods to do this were intensively explored, and two were chosen—the electromagnetic process developed at the University of California, Berkeley, under Ernest Orlando Lawrence and the diffusion process developed under Urey at Columbia University. Both of these processes, particularly the diffusion method, required large, complex facilities and huge amounts of electric power to produce even small amounts of separated uranium-235. Philip Hauge Abelson developed a third method called thermal diffusion, which was also used for a time to effect a preliminary separation. These methods were put into production at a 70-square-mile (180-square-km) tract near Knoxville, Tennessee, originally known as the Clinton Engineer Works, later as Oak Ridge.

Only one method was available for the production of the fissionable material plutonium-239. It was developed at the metallurgical laboratory of the University of Chicago under the direction of Arthur Holly Compton and involved the transmutation in a reactor pile of uranium-238. In December 1942 Fermi finally succeeded in producing and controlling a fission chain reaction in this reactor pile at Chicago.

Quantity production of plutonium-239 required the construction of a reactor of great size and power that would release about 25,000 kilowatt-hours of heat for each gram of plutonium produced. This required the development of chemical extraction procedures that would work under conditions never before encountered. An intermediate step in putting this method into production was taken with the construction of a medium-size reactor at Oak Ridge. The large-scale production reactors were built on an isolated 1,000-square-mile (2,600-square-km) tract on the Columbia River north of Pasco, Washington—the Hanford Engineer Works.

Before 1943, work on the design and functioning of the bomb itself was largely theoretical, based on fundamental experiments carried out at a number of different locations. In that year a laboratory directed by J. Robert Oppenheimer was created on an isolated mesa at Los Alamos, New Mexico, 34 miles (55 km) north of Santa Fe. This laboratory was tasked with developing methods to reduce the fissionable products of the production plants to pure metal and fabricate the metal to required shapes. Methods of rapidly bringing together amounts of fissionable material to achieve a supercritical mass (and thus a nuclear explosion) had to be devised, along with the actual construction of a deliverable weapon that would be dropped from a plane and fused to detonate at the proper moment in the air above the target. Most of these problems had to be solved before any appreciable amount of fissionable material could be produced, so that the first adequate amounts could be used at the fighting front with minimum delay.

By the summer of 1945, amounts of plutonium-239 sufficient to produce a nuclear explosion had become available from the Hanford Works, and weapon development and design were sufficiently advanced so that an actual field test of a nuclear explosive could be scheduled. Such a test was no simple affair. Elaborate and complex equipment had to be assembled to provide a complete diagnosis of success or failure. By this time the original $6,000 authorized for the Manhattan Project had grown to $2 billion.

The first atomic bombs: Trinity, Hiroshima, and Nagasaki

The first atomic bomb was exploded at 5:30 am on July 16, 1945, at the Alamogordo air base 120 miles (193 km) south of Albuquerque, New Mexico. Oppenheimer had called the site “Trinity” in reference to one of John Donne’s Holy Sonnets. The bomb—a plutonium implosion device called Gadget—was raised to the top of a 100-foot (30-metre) steel tower that was designated “Zero.” The area at the base of the tower was marked as “Ground Zero,” a term that would pass into common parlance to describe the centre of an (often catastrophic) event. The tower was surrounded by scientific equipment, with remote monitoring taking place in bunkers occupied by scientists and a few dignitaries 10,000 yards (9 km) away. The explosion came as an intense light flash, a sudden wave of heat, and later a tremendous roar as the shock wave passed and echoed in the valley. A ball of fire rose rapidly, followed by a mushroom cloud extending to 40,000 feet (12,200 metres). The bomb generated an explosive power equivalent to 15,000 to 20,000 tons of trinitrotoluene (TNT); the tower was completely vaporized and the surrounding desert surface fused to glass for a radius of 800 yards (730 metres).

The following month, two other atomic bombs produced by the project, the first using uranium-235 and the second using plutonium, were dropped on the Japanese cities of Hiroshima and Nagasaki. Neither city had been attacked during the U.S. strategic bombing campaign until that point, and planners wished to demonstrate the destructive power of the bombs. Hiroshima was selected as the primary target because of its military value; the city served as the headquarters of the Japanese Second Army. On August 6, 1945, at about 8:15 am local time, a U.S. B-29 bomber released a gun assembly fission bomb—dubbed Little Boy—above Hiroshima. The weapon detonated at an altitude of 1,900 feet (580 metres), and the explosive yield was estimated to be the equivalent of 15,000 tons of TNT. Some 70,000 people were killed instantly, and by the end of the year the death toll had surpassed 100,000. Two-thirds of the city area was destroyed.

By the morning of August 9, 1945, the Soviet Union had declared war on Japan, but the Japanese government had not yet communicated its intent to surrender to the Allies. A B-29 carrying Fat Man—a plutonium implosion bomb similar to the one used in the Trinity test—was initially dispatched to Kokura (now part of Kitakyūshū, Japan). Thick clouds and haze over Kokura prevented the bombardier from sighting the designated aimpoint, however, and the bomber proceeded to its secondary target, the port city of Nagasaki. At 11:02 am Fat Man exploded at an altitude of 1,650 feet (500 metres) northwest of the city centre. The bomb detonated with the explosive force of 21,000 tons of TNT. An estimated 40,000 people were killed instantly, and at least 30,000 more would die from their injuries and radiation poisoning by the end of the year. About 40 percent of the city’s buildings were completely destroyed or severely damaged. Due to the area’s uneven terrain, a significant part of Nagasaki—particularly in the southeastern industrial and government district—was relatively unscathed. The Japanese initiated surrender negotiations the next day. By this point, Groves had notified U.S. Pres. Harry S. Truman that another bomb would be ready for delivery within a week.

On September 2, 1945, a Japanese delegation signed formal surrender documents on the deck of the USS Missouri. Shortly after the conclusion of hostilities, Manhattan Project physicist Philip Morrison traveled to Hiroshima at the request of the War Department to study the effects of the atomic bomb. Characterizing the bomb as “preeminently a weapon of saturation,” he said, “It destroys so quickly and so completely such a large area that defense is hopeless.” Horrified by what he had witnessed, Morrison would spend the rest of his life campaigning against nuclear weapons and a potential “third bomb.”

Operation Crossroads and the end of the Manhattan Project

After the war, the Manhattan Project oversaw Operation Crossroads, a military-scientific experiment conducted at Bikini atoll in the South Pacific in 1946. “Able,” the first peacetime atomic weapons test, was carried out on July 1, 1946. In attendance were some 42,000 U.S. military personnel, as well as more than 100 journalists and representatives from a dozen foreign countries. A 20-kiloton atomic bomb was dropped from a B-29 and exploded at an altitude of about 520 feet (158 metres) over a fleet of about 80 decommissioned World War II naval vessels. Only five ships were sunk by the blast, and, although several more were damaged, the majority survived the explosion relatively unscathed. Within a day, radiation levels had subsided enough for the ships to be boarded and inspected. Press and foreign military observers seemed underwhelmed that the blast had not vaporized the assembled ships, but such an appraisal discounted the debilitating effect that radiation would have had on a ship’s crew. Many test animals placed throughout the fleet quickly succumbed to radiation sickness, confirming a prediction in the Bulletin of the Atomic Scientists that “a large ship, about a mile away from the explosion, would escape sinking, but the crew would be killed by the deadly burst of radiations from the bomb, and only a ghost ship would remain, floating unattended on the vast waters of the ocean.”

The second test, “Baker,” took place on July 25, 1946. A 23-kiloton device was suspended at a depth of 90 feet (27 metres) from a decommissioned landing craft in the Bikini lagoon. At the moment of the explosion, a luminous dome rose on the surface of the lagoon, followed by an opaque cloud that enveloped about half the target area. The cloud dissipated within seconds, revealing a column of ascending water that lifted the 26,000-ton battleship USS Arkansas into the air for a brief moment. The column of water, some 2,200 feet (670 metres) in diameter, rose to a height of 1 mile (1.6 km), sending spray still higher. The expanding column of spray engulfed about half the ships in the target fleet with radioactive water. Waves traveling outward from the explosion were up to 100 feet (30 metres) tall, even at a distance of 1,000 feet (some 300 metres) from the epicentre. The evaluation board of the Joint Chiefs of Staff reported that the explosion had produced intense radioactivity in the waters of the lagoon. The target ships were saturated with radioactive water so lethal that four days after the test, it was still unsafe for inspection parties to spend “any useful length of time” in the centre of the target area or on any of the ships anchored there. Persistent radiation and the difficulty of decontamination led to the cancellation of “Charlie,” a planned third test that would have involved a bomb being detonated at the bottom of the Bikini lagoon.

After the conclusion of Operation Crossroads, the Manhattan District relinquished direction of the plants and laboratories under its jurisdiction to the U.S. Atomic Energy Commission (AEC), a civilian agency established by act of Congress in August 1946. Under the AEC, weapon development and testing continued along with development of the peaceful uses of atomic energy. The U.S. government disbanded the AEC under the Energy Reorganization Act of 1974 and divided its functions between two new agencies: the Nuclear Regulatory Commission, which regulates the nuclear power industry, and the Energy Research and Development Administration, which was eliminated in 1977 when the Department of Energy was created.